Thursday, November 5, 2009

Your Car Stereo's System - 5 Tips to Professional Results

You chose the new car stereo and now it's time to install. The final result depends on the quality of the installation. No matter how expensive the car radio system is whether or not installed correctly. The speakers will depend on the amplifier and the type of housing. The amplifier depends on the current and the current depend on the alternator and wiring. The errors will leave you with disappointing results. Here are some tips to make the installation of a car radio of success: The first thing to do is determine the location of the speakers. The speaker placement is the key to sound quality. The distance between the left and right speakers and the distance between the left and right ears is not always the same. Try to make the difference between left and right speakers as possible. You might have better luck if you place the speakers on the ground, but runs the risk that the sound seems to come from below. The position of the speakers is essential for the sound quality you get from the car radio. By installing the system of car radios, speakers, place temporarily at several places to find the perfect sound before installing them permanently. After determining the perfect location for your speakers, you must use Dynamat or similar material to stop vibration. This is to prevent the metal panels to join your audio system. How to connect the cables and the location of the cables is essential for high quality sound from your car radio system. Some install huge amplifiers in an attempt to get the best sound from your speakers. The fact is that there is more need for the amp, you just need good quality cables to connect. Now you can begin installing the amps and head unit. You can choose to use the cable factory or you may want to give the unit headed by a separate circuit. If your factory car stereo has excellent sound quality you should not need an additional circuit. Use good quality cables and do not reduce costs in terminals and distribution blocks. This is the time to install the filters as well. The construction of a speaker enclosure is the next step. There is no set of rules about what care works best with your car radio system. You must determine what type of home will give you the sound you want. Different sizes and shapes of the logs to produce different sounds. The best type of case is an individual choice. You should experiment with different shapes and sizes until you find the sound quality you seek. After the speakers are installed to your satisfaction, make sure your door panels upholstered with colors that match the interior. Installing the car radio system is a very personal experience. Experimenting with different positions and connections to find the sound quality you seek. George Steiner www.1-caraudio.com George Steiner and Judy of North Carolina, without success, have been through the teenage eons with their two daughters. The bones of countless boyfriends with modified auto stereo systems for the transmission of severe shaking, little room to sit, because of electronic and non-zero gagets, trunks, experiences we can do without it!

No comments:

Post a Comment